This sample code provided programmed in GP-Pro EX features a Proface HMI display setup as an Ethernet/IP Master for QTY (5) Yamaha Ethernet/IP slaves. The Proface HMI acts as a master to QTY (2) RCX340 controllers and QTY (3) TS controllers. One of the TS controllers is a Yamaha motor connected to QC Conveyor acting as an indexing servo. There is no PLC required with this integration method because the HMI has built in ladder that starts up all the Yamaha slaves via Ethernet/IP bits. Attached to the Proface is a CAN-BUS I/O module to connect a sensor and valves to the Proface ladder logic.